Sawstop Table Saw Accessories | SawStop

Table Saw Brake Cartridge For 10″ Blades (Blue) – Equivalent to TSBC-10R2

ipdesign — Wed, 13 Oct 2021 19:40:31 +0000

The Standard Brake Cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury. It is compatible with all standard 10″ blades on SawStop saws. The locking key allows the user to quickly and easily switch between the Standard Brake Cartridge and Dado Brake Cartridge when making standard or dado cuts.

The post Table Saw Brake Cartridge For 10″ Blades (Blue) – Equivalent to TSBC-10R2 appeared first on Sawstop.

Table Saw Dado Cartridge for 8″ Dado sets (Blue) – Equivalent to TSDC-8R2

ipdesign — Wed, 13 Oct 2021 19:40:21 +0000

The Dado Brake Cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury. It is compatible with all standard 8″ dado sets up to 29/32″ thick on SawStop saws. The locking key allows the user to quickly and easily switch between the Standard Brake Cartridge and Dado Brake Cartridge when making standard or dado cuts.

The post Table Saw Dado Cartridge for 8″ Dado sets (Blue) – Equivalent to TSDC-8R2 appeared first on Sawstop.

Compact Table Saw Standard Zero Clearance Insert

ipdesign — Wed, 06 Jul 2022 18:42:16 +0000

The Standard table saw insert is specifically engineered for the SawStop 10” Compact Table Saw. This zero-clearance insert is for accurate cuts and reduce tear out. One push lockdown allows for tool-free operation and easy install.

The post Compact Table Saw Standard Zero Clearance Insert appeared first on Sawstop.

9-Piece Brass Precision Template Guide Set

ipdesign — Wed, 13 Oct 2021 19:38:35 +0000

Compatible with most routers, this set contains a variety of brass template guides that support general routing, dovetailing, and more. Includes a custom-fit phenolic insert, eight guides (1 19/64″, 5/8″, 27/32″, 17/32″, 17/64″, 9/32″, 11/32″, 13/32″) and 1 lock nut.

The post 9-Piece Brass Precision Template Guide Set appeared first on Sawstop.

Standard Zero Clearance Insert

ipdesign — Wed, 13 Oct 2021 19:40:44 +0000

This insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using standard 10″ saw blades. Precision machined from a high-quality, ultra-strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving knife and has dual metal wear plates for antikickback pawls.

The post Standard Zero Clearance Insert appeared first on Sawstop.

Dado Zero Clearance Insert

ipdesign — Wed, 13 Oct 2021 19:40:39 +0000

This insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using 8″ dado blades. Precision machined from a high-quality, ultra-strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table.

The post Dado Zero Clearance Insert appeared first on Sawstop.

Jobsite Saw Standard Zero Clearance Insert

ipdesign — Wed, 13 Oct 2021 19:39:21 +0000

Jobsite saw standard inserts are engineered for the SawStop jobsite saw with a 10″ blade. Zero clearance for accurate cuts and reduced Tearout. One push lockdown allows for tool-free operation. Positioning screws ensure a solid and precise fit in the table. Pre-formed clearance slots for SawStop blade guard and riving knife. Table saw insert, 16 in. L, 1 in. H

The post Jobsite Saw Standard Zero Clearance Insert appeared first on Sawstop.

Jobsite Saw Dado Zero Clearance Insert

ipdesign — Wed, 13 Oct 2021 19:39:25 +0000

Dado Table Saw Insert, For Use With Jobsite Saws, Length 16 In., Width 4-1/2 In., Height 1 In.. One push lockdown allows for tool-free operation.Positioning screws ensure a solid and precise fit in the table.

The post Jobsite Saw Dado Zero Clearance Insert appeared first on Sawstop.

Dust Collection Panel

ipdesign — Wed, 13 Oct 2021 19:39:44 +0000

A versatile dust collection system that fits 2.5” and 4” dust collection systems. Quick and easy to install. For use on the Contractor Saw.

The post Dust Collection Panel appeared first on Sawstop.

Two Cast Iron Wings

ipdesign — Wed, 13 Oct 2021 19:39:30 +0000

Improve the look and stability of your SawStop Cotnractor Saw. Engineered to align perfectly with saw’s table, rails and extension table.

The post Two Cast Iron Wings appeared first on Sawstop.