Router Tables | SawStop

Industrial Series 36″ Extension Table

ipdesign — Mon, 16 May 2022 20:13:35 +0000

Complete your 52″ Industrial In-Line Router Table configuration with this extension table for a perfect fit when installed between the rails.

The post Industrial Series 36″ Extension Table appeared first on Sawstop.

Professional Series 36″ Extension Table

ipdesign — Mon, 16 May 2022 19:49:57 +0000

Complete your 52″ Professional In-Line Router Table configuration with this extension table for a perfect fit when installed between the rails.

The post Professional Series 36″ Extension Table appeared first on Sawstop.

Cast Iron Table Insert for 36″ PCS RT config

ipdesign — Tue, 19 Apr 2022 15:32:53 +0000

Complete your 36″ Professional In-Line Router Table configuration with this beautiful Intermediate Cast Iron Wing. When installed, it completes a full cast table from left to right.

The post Cast Iron Table Insert for 36″ PCS RT config appeared first on Sawstop.

9-Piece Brass Precision Template Guide Set

ipdesign — Wed, 13 Oct 2021 19:38:35 +0000

Compatible with most routers, this set contains a variety of brass template guides that support general routing, dovetailing, and more. Includes a custom-fit phenolic insert, eight guides (1 19/64″, 5/8″, 27/32″, 17/32″, 17/64″, 9/32″, 11/32″, 13/32″) and 1 lock nut.

The post 9-Piece Brass Precision Template Guide Set appeared first on Sawstop.

Double Horizontal Feather Board for Router Tables

ipdesign — Wed, 13 Oct 2021 19:38:55 +0000

Designed to fit SawStop RT table miter slots, this double-height feather board can be used as-is or as two separate feather boards to help minimize kickback.

The post Double Horizontal Feather Board for Router Tables appeared first on Sawstop.

Single Vertical Feather Board for Router Tables

ipdesign — Wed, 13 Oct 2021 19:38:45 +0000

Designed to fit SawStop RT fence miter slots, this vertical feather board provides downward pressure to keep your workpiece in position and help prevent kickback.

The post Single Vertical Feather Board for Router Tables appeared first on Sawstop.

Stock Guide for Router Table Fence

ipdesign — Wed, 13 Oct 2021 19:38:25 +0000

This guide’s comfort grip and large face makes for easy stock management on router pass-through, and accommodates sacrificial faces with its integrated T-slots.

The post Stock Guide for Router Table Fence appeared first on Sawstop.

Downdraft Dust Collection Box for Router Tables

ipdesign — Wed, 13 Oct 2021 19:38:15 +0000

Compatible with all SawStop Router Tables, the Downdraft Dust Collection box was engineered to draw the dust down from the router bit and deliver to a 4″ port for collection, all while substantially minimizing router noise. This steel collection box features interchangable panels for optimal dust port and vent placement. Plug the 2.25″ dust hose from the router fence directly into the dust box’s branch inlet, and let the 4″ port deliver above and below table dust from the same port.

The post Downdraft Dust Collection Box for Router Tables appeared first on Sawstop.

Flip Stop for Router Fence

ipdesign — Wed, 13 Oct 2021 19:38:04 +0000

Designed to fit SawStop RT Fence Assemblies, this Flip Stop is built to facilitate repeated cuts with precision.

The post Flip Stop for Router Fence appeared first on Sawstop.

4-Piece Phenolic Zero Clearance Insert Ring Set for Router Lift

ipdesign — Wed, 13 Oct 2021 19:37:53 +0000

Solid phenolic inserts that can be cut to deliver exact results for each of your favorite bits. Actual dimensions: 3 3/4” w, 3 3/4” d, 1 1/4” h. Ultra-strong phenolic core material to reduce tear out and chip out.

The post 4-Piece Phenolic Zero Clearance Insert Ring Set for Router Lift appeared first on Sawstop.